What is the most important thing to do to make my windows and doors operate smoothly? The single most important factor in smooth operation of our product is a plumb and square installation. If your casement or door does not close easily, check it with a level, a square and a plumb line. Make this check BEFORE stucco is applied.

To Clean Painted Finishes: Use water and a mild detergent to clean painted finishes.

To Clean Anodized Finishes: Use turpentine or paint thinner to clean surfaces and then rinse with water and a mild detergent.

Maintain Roto Operators: Clean and lubricate tracks (under the window ventilators) and operate arm and grease the gear every few years or less depending on job conditions.

Maintain Friction Hinges (4-bar scissor hinges): Clean and lubricate pivot points with light machine oil (3 in 1 oil) at least every year.

Maintain Multi-Point Door Hardware: Use light machine oil to lubricate the multi-points every 6 months - depending upon job conditions. If doors are in close proximity to ocean, multi-point hardware should be cleaned and lubricated with greater frequency.