Window members are constructed of 6063-T6 aluminum alloy with all joints and corners sigma welded. Frame members will be minimum .125" thickness and either 1" or 1 1/2" or 2" in depth according to series of windows in use.

Extruded aluminum glazing bead will be .050". Stucco grounds shall be .064" minimum thickness. Sill shall be .093" minimum thickness. Surrounds and sill are pressed on and welded at the factory.

When extension or butt hinges are used they are constructed of .156" stock. Both types are securely welded to the frame and ventilator.

Ventilators shall be adjusted and locked shut at the factory, and shall require no further attention until installation of hardware.

 

501 South Isis Avenue, Inglewood, California, 90301
Phone: (310)-665-0490 FAX: (310)-641-7356

home | windows | doors | contacts